UN1CO is a 2 component,1-coat oil from the newest generation using
renewable natural raw materials. Thanks to its special technology
there is only one coat needed to finish your parquet. The combination
of the oil with the hardener results in a fast drying and excellent
chemical and mechanical resistant finish. UN1CO is VOC and Cobalt
viscosity +/- 40 sec (Din 4mm)
solid content 100% by weight
density +/- 0,95 kg/l
POT-LIFE +/- 3 hours after adding the hardeNER
available in 16 colors - see color catalogue
Sand the surface with grain 100-120 and remove afterwards the sanding
TIP: for a more intensice coloring of the wood, slightly wetten the
Mix the oil with the hardener (100/30) and let the product rest for
about 10 minutes. UN1CO can be applied with a buffing machine using
a white or beige pad., by brush, cloth or sponge. Let the product
dry for a few minutes. and remove the superfluous oil within 15 minutes
with a white pad or cloth untill the surface doesn’t stick anymore.
Check afterwards if the surface feels handdry.
Slightly walkable after 24 hours drying depending on the type of
wood, the temperature, the humidity.
+/- 50 - 60 m²/liter per coat
Clean regularly with flooring soap Ciranova. Depending on the frequent
use of the parquet, use maintenance oil periodically and for
thorough cleaning, use Intensive Cleaner Ciranova.
ATTENTION : UN1CO needs +/- 2 weeks to fully cure. Don’t use any
water or maintenance products on the floor during this period.
FREE DELIVERY TO UK MAINLAND ALLOW 1 - 3 DAYS AND IF NOT AVAILABLE WE WILL EMAIL YOU STRAIGHT BACK.